Your cart
Sub-Total: £0.00
Stellartone ToneStyler BASS TEN
£120.00 – £150.00Price range: £120.00 through £150.00 Incl. VAT
Product Description
The Stellartone Bass Ten replaces your passive tone control and is a Ten-Position High-Impedance passive tone shaping circuit with zero noise, distortion, compression or clipping.
The Bass Ten offers ten discrete tone settings with the tenth setting as a flat-bypass. The maximum capacitance is 0.1µF
BASS TEN SHORT
Stellartone ToneStyler B-10-S tone control: a ten-position QE control featuring eight hi-cut / mid-cut resonance filters, plus a”virtual tone pot” loading circuit and true bypass.
Maximum capacitance: .047uF. 14/” solid- shaft tip solely fits USA 1/4″ hole set-screw knobs. 318″-32 dia. x5/16″ short-length USA bushing mounts through thin surfaces up to 3/16″ thick.
The Bass Ten short is recommended for pickguard/plate mounted controls on single pickup, two pickup instruments that utilise the correct type of no load blend control , or instruments with two tone controls.
BASS TEN LONG
Stellartone ToneStyler B-10-L tone control: a ten-position QE control featuring eight hi-cut / mid-cut resonance filters, plus a”virtual tone pot” loading circuit and true bypass.
Maximum capacitance: 100uF. 24-fine-spline split shaft tip fits USA push-on knobs plus 6mm and 1/4″ set-screw knobs. 3/8″- 32 dia x 1/2″ in length USA bushings mounts through all surfaces up to 3/8″ thick.
Product Specs/Additional Information
The Bass Ten features:
1. Heavy-Duty Mil-Spec Rotary switches with Gold Contacts and Terminals (Mfg. by Grayhill)
2. 1/4″ Solid “D” Shaft
3. U.S. Standard 3/8″-32 Diameter x 1/2”” MID Length
4. Traditional Notched Design
5. Compact 15/16″ Diameter (Same size as Full-Size CTS Pot)
6. Low Profile (Only Requires 7/8″ Depth for Installation)
7. Molded-in Low Capacitance Shielded Mogami Cable
8. High-impedance passive analog tone circuitry with zero noise, distortion, compression or clipping
9. Mounting Hardware and Wiring Instructions
Related Videos
Audio
Product Description
The Stellartone Bass Ten replaces your passive tone control and is a Ten-Position High-Impedance passive tone shaping circuit with zero noise, distortion, compression or clipping.
The Bass Ten offers ten discrete tone settings with the tenth setting as a flat-bypass. The maximum capacitance is 0.1µF
BASS TEN SHORT
Stellartone ToneStyler B-10-S tone control: a ten-position QE control featuring eight hi-cut / mid-cut resonance filters, plus a”virtual tone pot” loading circuit and true bypass.
Maximum capacitance: .047uF. 14/” solid- shaft tip solely fits USA 1/4″ hole set-screw knobs. 318″-32 dia. x5/16″ short-length USA bushing mounts through thin surfaces up to 3/16″ thick.
The Bass Ten short is recommended for pickguard/plate mounted controls on single pickup, two pickup instruments that utilise the correct type of no load blend control , or instruments with two tone controls.
BASS TEN LONG
Stellartone ToneStyler B-10-L tone control: a ten-position QE control featuring eight hi-cut / mid-cut resonance filters, plus a”virtual tone pot” loading circuit and true bypass.
Maximum capacitance: 100uF. 24-fine-spline split shaft tip fits USA push-on knobs plus 6mm and 1/4″ set-screw knobs. 3/8″- 32 dia x 1/2″ in length USA bushings mounts through all surfaces up to 3/8″ thick.
Product Specs
The Bass Ten features:
1. Heavy-Duty Mil-Spec Rotary switches with Gold Contacts and Terminals (Mfg. by Grayhill)
2. 1/4″ Solid “D” Shaft
3. U.S. Standard 3/8″-32 Diameter x 1/2”” MID Length
4. Traditional Notched Design
5. Compact 15/16″ Diameter (Same size as Full-Size CTS Pot)
6. Low Profile (Only Requires 7/8″ Depth for Installation)
7. Molded-in Low Capacitance Shielded Mogami Cable
8. High-impedance passive analog tone circuitry with zero noise, distortion, compression or clipping
9. Mounting Hardware and Wiring Instructions
