Your cart
Sub-Total: £0.00
EBS HD360 – Pre-Owned
£399.00
Out of Stock
Product Description
The HD360 is a solid state bass amp with a highly transparent sound and powerful 4-band EQ. The HD360 delivers a crisp and pure sound experience thanks to its superb dynamics and consistent quality throughout the entire frequency range from the lowest sub-bass to the highest treble. Key improvements to this bass head include an improved preamp with better low frequency response and more head room. The HD360 also offers support for a 4 channel footswitch to control Character filter, Filter Bypass, Drive and Mute along with a mix-in filter for the effects loop and built in speaker simulation for the XLR output.
This amplifier is in fantastic condition, has been fully tested and comes with a Footswitch.
Product Specs/Additional Information
- Input Impedance: 2 Mohms
- Frequency Response: 20 – 20.000 Hz
- Maximum Compression Ratio: (Compressor) 3:1
- Tone Controls:
- Bass: +/- 15 dB @ 100 Hz
- Middle: +/-12 dB @ 50 – 3000 Hz, Q=0.5
- Treble: +/- 15 dB @ 4 kHz
- Bright: -0/+20 dB @ 10 kHz
- Drive Control Gain: 0-30 dB
- Drive Type: Solid State
- Other Features: Character filters, Phantom power, Effects loop and Balanced Output
- Minimum speaker impedance: 2 ohms
- Dynamic Output Power: 350 W RMS
- Continuous Output Power: 300 W RMS
- Dimensions: (W x D x H) 19″ x 13″ x 2U (48cm x 33cm x 9cm)
- Weight: 9 kg / 20 lbs
Related Videos
Audio
Product Description
The HD360 is a solid state bass amp with a highly transparent sound and powerful 4-band EQ. The HD360 delivers a crisp and pure sound experience thanks to its superb dynamics and consistent quality throughout the entire frequency range from the lowest sub-bass to the highest treble. Key improvements to this bass head include an improved preamp with better low frequency response and more head room. The HD360 also offers support for a 4 channel footswitch to control Character filter, Filter Bypass, Drive and Mute along with a mix-in filter for the effects loop and built in speaker simulation for the XLR output.
This amplifier is in fantastic condition, has been fully tested and comes with a Footswitch.
Product Specs
- Input Impedance: 2 Mohms
- Frequency Response: 20 – 20.000 Hz
- Maximum Compression Ratio: (Compressor) 3:1
- Tone Controls:
- Bass: +/- 15 dB @ 100 Hz
- Middle: +/-12 dB @ 50 – 3000 Hz, Q=0.5
- Treble: +/- 15 dB @ 4 kHz
- Bright: -0/+20 dB @ 10 kHz
- Drive Control Gain: 0-30 dB
- Drive Type: Solid State
- Other Features: Character filters, Phantom power, Effects loop and Balanced Output
- Minimum speaker impedance: 2 ohms
- Dynamic Output Power: 350 W RMS
- Continuous Output Power: 300 W RMS
- Dimensions: (W x D x H) 19″ x 13″ x 2U (48cm x 33cm x 9cm)
- Weight: 9 kg / 20 lbs
