MXR Phase 100

£149.00 Incl. VAT

Only 1 left in stock

Product Description

The MXR Phase 100. With both a Speed control and a 4-waveform Intensity control, the Phase 100 offers a broad range of sounds.

This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).

THE LONG STORY
This big brother of the Phase 90 offers an even broader range of sounds. Along with the speed control there is a 4-position rotary switch that selects between four different intensities, defined as preset waveform patterns. Great for guitar, bass, keys, vocals, and more!

Product Specs/Additional Information

DESCRIPTION
• Big brother of the Phase 90 with
a broader range of sounds
• Four-position rotary switch
selects four preset waveforms
• Spacey, psychedelic ambience
for guitar solos or chords
DIRECTIONS
• Run a cable from your guitar
to the Phase 100’s INPUT jack
and run another cable from the
Phase 100’s OUTPUT jack to
your amplifier.
• Start with all controls
at 12 o’clock.
• Turn the effect on by depressing
the footswitch.
• Rotate the SPEED knob
clockwise for a faster phase
effect or counterclockwise
for a slower phase effect.
• Use the INTENSITY knob to
select your desired waveform.
SLOW AND DEEP SPINNING SPEAKER MEDIUM SUBTLE
CONTROLS
INTENSITY knob selects one of
four preset phase waveforms
SPEED knob controls speed
of phase effect
FOOTSWITCH toggles
effect on/bypass (red LED
indicates on)
DUNLOP MANUFACTURING, INC.
P.O. BOX 846 BENICIA, CA 94510 U.S.A.
TEL: 1-707-745-2722 FAX: 1-707-745-2658
POWER
The MXR Phase 100 is powered
by one 9-volt battery (remove
bottom plate to install), a 9-volt
AC adapter such as the Dunlop
ECB003/ECB003E, or a DC Brick™
power supply.
SPECIFICATIONS
Input Impedance 500 kΩ
Output Impedance 3 kΩ
Maximum Intput Level +5 dB
Maximum Output Level +8 dB
Noise Floor* 95 dBV
Phase Shift Range 180 Degrees
Bypass Hardwire
Current Draw 6 mA
Power Supply 9

Related Videos

Product Description

The MXR Phase 100. With both a Speed control and a 4-waveform Intensity control, the Phase 100 offers a broad range of sounds.

This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).

THE LONG STORY
This big brother of the Phase 90 offers an even broader range of sounds. Along with the speed control there is a 4-position rotary switch that selects between four different intensities, defined as preset waveform patterns. Great for guitar, bass, keys, vocals, and more!

Product Specs

DESCRIPTION
• Big brother of the Phase 90 with
a broader range of sounds
• Four-position rotary switch
selects four preset waveforms
• Spacey, psychedelic ambience
for guitar solos or chords
DIRECTIONS
• Run a cable from your guitar
to the Phase 100’s INPUT jack
and run another cable from the
Phase 100’s OUTPUT jack to
your amplifier.
• Start with all controls
at 12 o’clock.
• Turn the effect on by depressing
the footswitch.
• Rotate the SPEED knob
clockwise for a faster phase
effect or counterclockwise
for a slower phase effect.
• Use the INTENSITY knob to
select your desired waveform.
SLOW AND DEEP SPINNING SPEAKER MEDIUM SUBTLE
CONTROLS
INTENSITY knob selects one of
four preset phase waveforms
SPEED knob controls speed
of phase effect
FOOTSWITCH toggles
effect on/bypass (red LED
indicates on)
DUNLOP MANUFACTURING, INC.
P.O. BOX 846 BENICIA, CA 94510 U.S.A.
TEL: 1-707-745-2722 FAX: 1-707-745-2658
POWER
The MXR Phase 100 is powered
by one 9-volt battery (remove
bottom plate to install), a 9-volt
AC adapter such as the Dunlop
ECB003/ECB003E, or a DC Brick™
power supply.
SPECIFICATIONS
Input Impedance 500 kΩ
Output Impedance 3 kΩ
Maximum Intput Level +5 dB
Maximum Output Level +8 dB
Noise Floor* 95 dBV
Phase Shift Range 180 Degrees
Bypass Hardwire
Current Draw 6 mA
Power Supply 9

Related Videos

Related Products