Markbass Little Mark III

Out of Stock

Product Description

The flagship Markbass amplifier, the Little Mark III is the industrystandard for tone, portability and value.
This amp adds some high-requested features to its famous predecessor Little Mark II, with the same compact size and weight!
The Little Mark III’s solid-state preamp has a warm and natural sound, and faithfully reproduces the true tone of your instrument. The 500-watt Markbass power amp (Markbass Proprietary Technology) supplies impeccable bass frequency reproduction. The new DI output features a pre-post EQ switch and output level control, so you can optimize the signal you send to the mixer or recording unit.

Product Specs/Additional Information

INPUTS
INPUT: impedance 500 Kohm, max. voltage 15 Vpp
BALANCED INPUT (XLR): impedance 100 Kohm, max. voltage 25 Vpp
EFFECT RETURN: impedance 33 Kohm, max. voltage 10 Vpp
CONTROLS
GAIN: -60 dB to +23 dB range
MASTER VOLUME
LINE OUT LEVEL
GROUND LIFT (switch on rear panel)
PRE/POST EQ (switch on rear panel)
EQUALIZATION
LOW: center frequency: 40 Hz; level: ±16 dB
LOW MID: center frequency: 360 Hz, level: ±16 dB
HIGH MID: center frequency: 800 Hz, level: ±16 dB
HIGH: center frequency: 10 kHz, level: ±16 dB
VPF (Variable Pre-shape Filter): center frequency 380 Hz
VLE (Vintage Loudspeaker Emulator): frequency range 250 Hz-20 kHz
OUTPUTS
LINE OUT: balanced XLR, max. voltage 20 Vpp
EFFECT SEND: unbalanced, max. voltage 20 Vpp (pre-EQ)
TUNER OUT: unbalanced, max. voltage 2 Vpp
SPEAKER OUT: speakon/1/4″ combo, 1/4″
OTHER
WEIGHT: 5.07 lbs / 2.3 Kg
WIDTH: 10.87 in. / 27.6 cm
DEPTH: 9.84 in. / 25 cm
HEIGHT: 3.27 in. / 8.3 cm
OUTPUT POWER: 500W RMS @ 4 ohms / 300W RMS @ 8 ohms
Minimum ohm load for all Markbass heads is 4 ohms.

Related Videos

Product Description

The flagship Markbass amplifier, the Little Mark III is the industrystandard for tone, portability and value.
This amp adds some high-requested features to its famous predecessor Little Mark II, with the same compact size and weight!
The Little Mark III’s solid-state preamp has a warm and natural sound, and faithfully reproduces the true tone of your instrument. The 500-watt Markbass power amp (Markbass Proprietary Technology) supplies impeccable bass frequency reproduction. The new DI output features a pre-post EQ switch and output level control, so you can optimize the signal you send to the mixer or recording unit.

Product Specs

INPUTS
INPUT: impedance 500 Kohm, max. voltage 15 Vpp
BALANCED INPUT (XLR): impedance 100 Kohm, max. voltage 25 Vpp
EFFECT RETURN: impedance 33 Kohm, max. voltage 10 Vpp
CONTROLS
GAIN: -60 dB to +23 dB range
MASTER VOLUME
LINE OUT LEVEL
GROUND LIFT (switch on rear panel)
PRE/POST EQ (switch on rear panel)
EQUALIZATION
LOW: center frequency: 40 Hz; level: ±16 dB
LOW MID: center frequency: 360 Hz, level: ±16 dB
HIGH MID: center frequency: 800 Hz, level: ±16 dB
HIGH: center frequency: 10 kHz, level: ±16 dB
VPF (Variable Pre-shape Filter): center frequency 380 Hz
VLE (Vintage Loudspeaker Emulator): frequency range 250 Hz-20 kHz
OUTPUTS
LINE OUT: balanced XLR, max. voltage 20 Vpp
EFFECT SEND: unbalanced, max. voltage 20 Vpp (pre-EQ)
TUNER OUT: unbalanced, max. voltage 2 Vpp
SPEAKER OUT: speakon/1/4″ combo, 1/4″
OTHER
WEIGHT: 5.07 lbs / 2.3 Kg
WIDTH: 10.87 in. / 27.6 cm
DEPTH: 9.84 in. / 25 cm
HEIGHT: 3.27 in. / 8.3 cm
OUTPUT POWER: 500W RMS @ 4 ohms / 300W RMS @ 8 ohms
Minimum ohm load for all Markbass heads is 4 ohms.

Related Videos

Related Products