Your cart
Digitech MonoNeon Whammy
£269.00 Incl. VAT
Only 1 left in stock




Product Description
The DigiTech MonoNeon Whammy pedal goes where no whammy pedal has gone before, with new octave blend modes and up to 3 octaves of HyperSonic pitch shifting. Developed in collaboration with trailblazing bassist MonoNeon, the MonoNeon Whammy delivers mind-blowing pitch manipulation for guitar and bass alike.
Make your music Hypersonic – Send your tone soaring with the HyperSonic 3-octave pitch rise.
New octaver blend modes – Create never-before-heard sonic textures with new octaver blend modes.
MIDI-capable – Ready to integrate with advanced performance rigs with support for 5-pin MIDI control.
Artist-inspired design – Unique artwork and signature style make the MonoNeon Signature Whammy a bold addition to your pedalboard.
Precise Pitch Tracking – Primed for both guitar and bass, even extended-range instruments.
New Octaver Effects:
- Dry w/ 1 to 2 Octaves Up
- Dry w/ 1 Octave Down and 1 Octave Down
- Dry w/ 2 Octaves Down to 1 Octave Down
Familiar Harmony Settings – Six harmony settings including 4th down to 5th up, and 5th down to 4th up
Neon Green LED – You’ll know its on – green means GO!
Expressive Control – Built-in expression pedal for pitch bending and detuning.
Classic/Chords Switch – Toggle between the original Whammy algorithm (great for single notes) or the modern chordal algorithm (great for bending whole chords).
Harmony LEDs – One of these LEDs will light when a Harmony effects is selected. blending your dry signal with the effect signal.
Whammy LEDs – One of these LEDs will light when a Whammy effect is selected – Whammy effects do not add your dry signal to the effect signal.
Glows under black light – Neon Orange and Yellow paint job not knoll makes MonoNeon Whammy stand out, but glows under black lights on stage.
Included in the box:
• MonoNeon Whammy Pedal
• Power Supply
• User’s Manual
• 2 Guitar Case Stickers
• Warranty Registration Information Card
• Special MonoNeon Customizing Kit
> Gaffer’s Tape – Neon Yellow & Neon Orange
> Mini Permanent Marker
Product Specs/Additional Information
Input / Output
Instrument Input Type: Unbalanced ¼” TS phone jack
Max Input Level: +5 dBu
Input Impedance: 1 MΩ
MIDI Input: 5-Pin DIN
Output Type: Unbalanced ¼” TS phone jack
Max Output Level: +10 dBu
Output Impedance: 1 kΩ
Electronics
Frequency Response: 20 Hz to 20 kHz
Signal to Noise Ratio: >105 dB (A-weighted), referenced to max level, 22 kHz bandwidth
THD: 0.004% @ 1 kHz, referenced to 1 dBu with unity gain
Sample Rate: 44.1 kHz
A/D Conversion: 24-bit
D/A Conversion: 24-bit
Physical
Dimensions: 6.5” (16.51 cm) x 7.75” (19.68 cm) x 2.5” (6.35 cm) (WxDxH)
Shipping Weight: 3.8 lbs (1720 g)
Power
Power Consumption: 2.4 W (265 mA @ 9VDC)
Power Requirements: 9 VDC External Adapter (center negative)
Included Power Adapter: PS0913DC (9V DC @ 1.3 A), center negative
Related Videos
Audio




Product Description
The DigiTech MonoNeon Whammy pedal goes where no whammy pedal has gone before, with new octave blend modes and up to 3 octaves of HyperSonic pitch shifting. Developed in collaboration with trailblazing bassist MonoNeon, the MonoNeon Whammy delivers mind-blowing pitch manipulation for guitar and bass alike.
Make your music Hypersonic – Send your tone soaring with the HyperSonic 3-octave pitch rise.
New octaver blend modes – Create never-before-heard sonic textures with new octaver blend modes.
MIDI-capable – Ready to integrate with advanced performance rigs with support for 5-pin MIDI control.
Artist-inspired design – Unique artwork and signature style make the MonoNeon Signature Whammy a bold addition to your pedalboard.
Precise Pitch Tracking – Primed for both guitar and bass, even extended-range instruments.
New Octaver Effects:
- Dry w/ 1 to 2 Octaves Up
- Dry w/ 1 Octave Down and 1 Octave Down
- Dry w/ 2 Octaves Down to 1 Octave Down
Familiar Harmony Settings – Six harmony settings including 4th down to 5th up, and 5th down to 4th up
Neon Green LED – You’ll know its on – green means GO!
Expressive Control – Built-in expression pedal for pitch bending and detuning.
Classic/Chords Switch – Toggle between the original Whammy algorithm (great for single notes) or the modern chordal algorithm (great for bending whole chords).
Harmony LEDs – One of these LEDs will light when a Harmony effects is selected. blending your dry signal with the effect signal.
Whammy LEDs – One of these LEDs will light when a Whammy effect is selected – Whammy effects do not add your dry signal to the effect signal.
Glows under black light – Neon Orange and Yellow paint job not knoll makes MonoNeon Whammy stand out, but glows under black lights on stage.
Included in the box:
• MonoNeon Whammy Pedal
• Power Supply
• User’s Manual
• 2 Guitar Case Stickers
• Warranty Registration Information Card
• Special MonoNeon Customizing Kit
> Gaffer’s Tape – Neon Yellow & Neon Orange
> Mini Permanent Marker
Product Specs
Input / Output
Instrument Input Type: Unbalanced ¼” TS phone jack
Max Input Level: +5 dBu
Input Impedance: 1 MΩ
MIDI Input: 5-Pin DIN
Output Type: Unbalanced ¼” TS phone jack
Max Output Level: +10 dBu
Output Impedance: 1 kΩ
Electronics
Frequency Response: 20 Hz to 20 kHz
Signal to Noise Ratio: >105 dB (A-weighted), referenced to max level, 22 kHz bandwidth
THD: 0.004% @ 1 kHz, referenced to 1 dBu with unity gain
Sample Rate: 44.1 kHz
A/D Conversion: 24-bit
D/A Conversion: 24-bit
Physical
Dimensions: 6.5” (16.51 cm) x 7.75” (19.68 cm) x 2.5” (6.35 cm) (WxDxH)
Shipping Weight: 3.8 lbs (1720 g)
Power
Power Consumption: 2.4 W (265 mA @ 9VDC)
Power Requirements: 9 VDC External Adapter (center negative)
Included Power Adapter: PS0913DC (9V DC @ 1.3 A), center negative
Related Videos
























