Your cart
Sub-Total: £0.00
Darkglass Microtubes X7 – Pre-Owned
Product Description
The Microtubes X7 series brings the studio method producers have been using the years to cover the whole bass distortion spectrum: from articulate high gain to punchy mild overdrive, raw and gnarly fuzz and everything in between. You now have absolute control in constructing your vision of what the perfect bass distortion texture, definition, and size should have.
Product Specs/Additional Information
High Pass Frequency
Controls the cutoff frequency to be distorted, ranging from 100Hz (for thicker, fuzzier saturation) or 1kHz for ultra-sharp definition.
High Drive
Sets the amount of distortion for the high pass side.
High Level
Sets the output volume of the distorted high-pass signal.
Low Pass Frequency
Controls the cutoff frequency to be mixed back to the high-pass side. Ranging from 50Hz (for only sub-bass) and 500Hz to preserve some clean mids.
Low Comp
Sets the amount of compression for the low-pass signal.
Low Level
Sets the output volume of the low-pass signal.
Master
Sets the overall volume of the unit.
Low shelf
+-12dB @ 80 Hz
500 Hz
+-12dB
1 kHz
+-12dB
High shelf
+-12dB @ 5 kHz
Dimensions
Width: 94 mm / 3,7″
Length: 120 mm/ 4,72″
Height: 46 mm / 1,81″
Weight: 320 g / 0,7 lb
Warning
The Microtubes X7 has a current draw of 100mA. Only use a regulated 9V DC adapter with a center-negative plug.
Unregulated power supplies and/or higher voltages may result in suboptimal noise performance and even damage your unit, voiding the warranty.
Out of Stock
Product Description
The Microtubes X7 series brings the studio method producers have been using the years to cover the whole bass distortion spectrum: from articulate high gain to punchy mild overdrive, raw and gnarly fuzz and everything in between. You now have absolute control in constructing your vision of what the perfect bass distortion texture, definition, and size should have.
Product Specs
High Pass Frequency
Controls the cutoff frequency to be distorted, ranging from 100Hz (for thicker, fuzzier saturation) or 1kHz for ultra-sharp definition.
High Drive
Sets the amount of distortion for the high pass side.
High Level
Sets the output volume of the distorted high-pass signal.
Low Pass Frequency
Controls the cutoff frequency to be mixed back to the high-pass side. Ranging from 50Hz (for only sub-bass) and 500Hz to preserve some clean mids.
Low Comp
Sets the amount of compression for the low-pass signal.
Low Level
Sets the output volume of the low-pass signal.
Master
Sets the overall volume of the unit.
Low shelf
+-12dB @ 80 Hz
500 Hz
+-12dB
1 kHz
+-12dB
High shelf
+-12dB @ 5 kHz
Dimensions
Width: 94 mm / 3,7″
Length: 120 mm/ 4,72″
Height: 46 mm / 1,81″
Weight: 320 g / 0,7 lb
Warning
The Microtubes X7 has a current draw of 100mA. Only use a regulated 9V DC adapter with a center-negative plug.
Unregulated power supplies and/or higher voltages may result in suboptimal noise performance and even damage your unit, voiding the warranty.
Related Videos
Related Products
Aero MusicMasterer 4
£105.00RightOn Bassman B-Bond
£49.00GruvGear GigBlade Edge 2
£109.00Two Notes Torpedo C.A.B M
£199.00