Bassics Squeezer

£159.00 Incl. VAT

Only 2 left in stock

Product Description

The Squeezer is simple and easy to use providing compression ranging from subtle to extreme.

The bypass footswitch makes it possible to set the levels so that switching the effect in and out does not cause a change in volume.

A unique feature is the unit’s ability to connect to any power supply between +9volts to +18 volts a.c or d.c. positive or negative polarity. It just needs the standard 2.5mm connector. Once this is connected, the control will light up to show that power is applied.

Turn all controls to their minimum position (anti-clockwise) and switch the compressor out via the footswith (‘Compress’ control not illuminated). Connect your bass to the ‘Input’ jack and the ‘Output’ jack to the amplifier input. It can of course also be inserted into an effects loop.

Simply turn the ‘Drive’ control up until the green lights starts to glow. Then press the footswitch so that the ‘Compress’ control illuminates and turn the ‘Compress’ control to add the required amount of compression. If the ‘Compress’ control does not provide sufficient compression even at maximum, increase the ‘Drive’ control until the desired amount is achieved.

The output control can be adjusted so that there is the right amount of level to feed your amplifier

Product Specs/Additional Information

Related Videos

Product Description

The Squeezer is simple and easy to use providing compression ranging from subtle to extreme.

The bypass footswitch makes it possible to set the levels so that switching the effect in and out does not cause a change in volume.

A unique feature is the unit’s ability to connect to any power supply between +9volts to +18 volts a.c or d.c. positive or negative polarity. It just needs the standard 2.5mm connector. Once this is connected, the control will light up to show that power is applied.

Turn all controls to their minimum position (anti-clockwise) and switch the compressor out via the footswith (‘Compress’ control not illuminated). Connect your bass to the ‘Input’ jack and the ‘Output’ jack to the amplifier input. It can of course also be inserted into an effects loop.

Simply turn the ‘Drive’ control up until the green lights starts to glow. Then press the footswitch so that the ‘Compress’ control illuminates and turn the ‘Compress’ control to add the required amount of compression. If the ‘Compress’ control does not provide sufficient compression even at maximum, increase the ‘Drive’ control until the desired amount is achieved.

The output control can be adjusted so that there is the right amount of level to feed your amplifier

Product Specs

Related Videos

Related Products