Acoustic Image Ten2 – Pre-Owned

Out of Stock

Product Description

The Ten2 has a superb class-D power amplifier with switch mode power supply, a compact two-way speaker system and a sophisticated, sensitive preamplifier. It also has the exclusive Cabrio Docking System that allow the head unit to be removed and used as a stand-alone amplifier.

The power amp is a high efficiency, 800W design that requires no external heat sinks or cooling fans and is capable of driving loads as low as 2 ohms. AC power and output speaker jacks are located on the rear of the enclosure. A standard, three-prong detachable AC power cord is used to provide power to the unit, while an AC voltage selection switch allows the unit to operate at 115V/60 Hz or 230V/50 Hz. Japan models operate at 100V, 50/60 Hz only. See the rear panel of your amp to verify the AC voltage capability.

The input channels of the preamp incorporate combo jack interfaces that allow either a high impedance instrument input (to optimize the sound of piezo-type pickups) or a mic input with a built in 10 dB pad, a three-band EQ, an effects loop with return level control, a selectable low cut filter for reduction of low frequency boominess, a phase reverse switch, a direct out capability with ground lift and pre/post EQ switch, a master level control and a mute switch. The preamp also has a switch that allows the second channel to be disconnected from the main amp and connected to a satellite power amp to create a stereo system.

The speaker enclosure incorporates a 2×10-inch woofer configuration (one is downfiring and the other is front firing) and a 2.5-inch tweeter that is coaxially mounted in front of the front firing woofer. The tweeter has a three position level control (0 dB, -6 dB and off). The exclusive Room Coupling Control allows the user to adjust the output of the downfiring woofer to help control boominess in certain acoustic settings. A built-in, spring-loaded tilt mechanism allows the cabinet to be tilted back to better direct sound to your listening position. The cabinet is made of an acoustically inert, high durability, injection molded polymer material which dramatically reduces the weight of the cabinet. Each unit comes with a fitted slip cover and shoulder strap. A padded case is available.

The Ten2 is the loudest combo amp that we make but in designing it, we chose fidelity over efficiency so it won’t play as loudly as the typical, lower fidelity 2×10 system. To generate higher SPLs may require an extension cabinet like the Ten2 EX or augmentation by a larger house system.

Product Specs/Additional Information

System

  • Frequency Response: 30 Hz – 20 kHz (40 – 16 kHz #3 dB)
  • Max SPL: >116 dB at 1 meter
  • AC Power: 15V/60 Hz or 230V/50 Hz, switchable,
  • Size: 17″ H x 15″ W x 13″ D, 14’H (EX)
  • Weight: 28 lbs

Preamp (Mic and Instrument Inputs through combo jack)

  • Mic Input: 600 ohm balanced, XLR connector, switchable 10 dB pad
  • Phantom Power: 47 volts, on/off switch w/LED indicator
  • Instrument Input: 1 M% impedance, 1/4 inch jack
  • Direct Out: +4 dB, balanced, XLR connector, ground lift, pre/post EQ selector
  • Effects Loop: Parallel type with return level control
  • Bass Control: Shelving type, +15 dB at 60 Hz
  • Mid Control: ‡15 dB at 650 Hz
  • Treble Control: Shelving type, +15 dB at 10 kHz
  • Low Cut Filter: -12 dB/octave sweepable from 30 to 400 Hz
  • Phase Reverse: Switchable 180 degree phase reversal

Effects

  • Type: Digital with 6 presets and level control
  • Program Presets: 3 reverb (hall, room, plate), delay, ambient, chorus, flange

Power Amp

  • Topology: Class D (PWM)
  • Switching Frequency: 250 kHz
  • Output Power: >450W at 852, >800W at 492, >1000W at 252 (internal speaker is 482)
  • External Speaker Output: Neutrik Speakon type (pole 1), 252 min, load including internal speakers, if connected

Speaker System

  • Woofer: Dual 10 inch, one downfiring with level control, one forward firing
  • Tweeter: 2.5 inch forward firing with attenuation control
  • Crossover: Passive, alignment corrected
  • Impedance:
  • Power rating: 600W

Related Videos

Product Description

The Ten2 has a superb class-D power amplifier with switch mode power supply, a compact two-way speaker system and a sophisticated, sensitive preamplifier. It also has the exclusive Cabrio Docking System that allow the head unit to be removed and used as a stand-alone amplifier.

The power amp is a high efficiency, 800W design that requires no external heat sinks or cooling fans and is capable of driving loads as low as 2 ohms. AC power and output speaker jacks are located on the rear of the enclosure. A standard, three-prong detachable AC power cord is used to provide power to the unit, while an AC voltage selection switch allows the unit to operate at 115V/60 Hz or 230V/50 Hz. Japan models operate at 100V, 50/60 Hz only. See the rear panel of your amp to verify the AC voltage capability.

The input channels of the preamp incorporate combo jack interfaces that allow either a high impedance instrument input (to optimize the sound of piezo-type pickups) or a mic input with a built in 10 dB pad, a three-band EQ, an effects loop with return level control, a selectable low cut filter for reduction of low frequency boominess, a phase reverse switch, a direct out capability with ground lift and pre/post EQ switch, a master level control and a mute switch. The preamp also has a switch that allows the second channel to be disconnected from the main amp and connected to a satellite power amp to create a stereo system.

The speaker enclosure incorporates a 2×10-inch woofer configuration (one is downfiring and the other is front firing) and a 2.5-inch tweeter that is coaxially mounted in front of the front firing woofer. The tweeter has a three position level control (0 dB, -6 dB and off). The exclusive Room Coupling Control allows the user to adjust the output of the downfiring woofer to help control boominess in certain acoustic settings. A built-in, spring-loaded tilt mechanism allows the cabinet to be tilted back to better direct sound to your listening position. The cabinet is made of an acoustically inert, high durability, injection molded polymer material which dramatically reduces the weight of the cabinet. Each unit comes with a fitted slip cover and shoulder strap. A padded case is available.

The Ten2 is the loudest combo amp that we make but in designing it, we chose fidelity over efficiency so it won’t play as loudly as the typical, lower fidelity 2×10 system. To generate higher SPLs may require an extension cabinet like the Ten2 EX or augmentation by a larger house system.

Product Specs

System

  • Frequency Response: 30 Hz – 20 kHz (40 – 16 kHz #3 dB)
  • Max SPL: >116 dB at 1 meter
  • AC Power: 15V/60 Hz or 230V/50 Hz, switchable,
  • Size: 17″ H x 15″ W x 13″ D, 14’H (EX)
  • Weight: 28 lbs

Preamp (Mic and Instrument Inputs through combo jack)

  • Mic Input: 600 ohm balanced, XLR connector, switchable 10 dB pad
  • Phantom Power: 47 volts, on/off switch w/LED indicator
  • Instrument Input: 1 M% impedance, 1/4 inch jack
  • Direct Out: +4 dB, balanced, XLR connector, ground lift, pre/post EQ selector
  • Effects Loop: Parallel type with return level control
  • Bass Control: Shelving type, +15 dB at 60 Hz
  • Mid Control: ‡15 dB at 650 Hz
  • Treble Control: Shelving type, +15 dB at 10 kHz
  • Low Cut Filter: -12 dB/octave sweepable from 30 to 400 Hz
  • Phase Reverse: Switchable 180 degree phase reversal

Effects

  • Type: Digital with 6 presets and level control
  • Program Presets: 3 reverb (hall, room, plate), delay, ambient, chorus, flange

Power Amp

  • Topology: Class D (PWM)
  • Switching Frequency: 250 kHz
  • Output Power: >450W at 852, >800W at 492, >1000W at 252 (internal speaker is 482)
  • External Speaker Output: Neutrik Speakon type (pole 1), 252 min, load including internal speakers, if connected

Speaker System

  • Woofer: Dual 10 inch, one downfiring with level control, one forward firing
  • Tweeter: 2.5 inch forward firing with attenuation control
  • Crossover: Passive, alignment corrected
  • Impedance:
  • Power rating: 600W

Related Videos

Related Products