Your cart
Sub-Total: £0.00
3 Leaf Audio Anima Complete Kit – BLUE
Product Description
Anima is a fresh take on the onboard bass preamplifier. The preamp itself is a module that is attached to a wiring harness with a locking connector. This allows the preamp to be swapped in seconds without soldering. Multiple modules are available, each with different frequency centers that cater to different sounds. Each one is built in the Pacific Northwest using only the highest quality components available: 0.5% thin film resistors, 1% NP0 capacitors, and high performance audiophile-grade active components. Anima has a level of clarity and dynamic response that exceeds any other onboard circuit.
Anima was the result of 3 years of development. Prototypes were relentlessly tested in a variety of instruments, and David Segal of New York Bass Works lent his ear during the prototyping process to make sure the final product was something worthy of a high performance instrument. As a result, the Anima preamp is standard equipment in New York Bass Works instruments.
Product Specs/Additional Information
This kits includes everything you need to install the Anima preamp in your bass:
1 x Anima Module
1 x Wiring Harness
1 x Switchcraft Stereo Jack
2 x DPDT Toggle Switches
3 x Noble 50k Potentiometers (you can add a stacked pot if you wish)
2 x 9v Battery Snaps
The Anima BLUE module is a high-performance bass preamp that is designed to have a less hi-fi and more rock-oriented tone than the RED module. The bass control is dynamic – the center frequency increases as boost/cut is increased, up to 70 Hz at maximum boost/cut. It has a more subtle roll-on than the bass control on the RED module. The treble control is voiced lower at 4 kHz which is perfect for accentuating pick attack and providing upper end presence even through tweeterless speaker cabinets. The switchable 400/1000 Hz midrange control is perfectly dialed in for shaping the body and attack of your instrument.
Bass +/- 17 dB @ 70 Hz (dynamic)
Mid +/- 13 dB @ 400/1000 Hz
Treble +/- 15 dB @ 4 kHz
Size 39 x 32 x 17 mm
Battery Life 500 Hours @ 18v
Input Impedance 1M Ohms
Output Impedance 100 Ohms
£175.00 Incl. VAT
Out of Stock
Product Description
Anima is a fresh take on the onboard bass preamplifier. The preamp itself is a module that is attached to a wiring harness with a locking connector. This allows the preamp to be swapped in seconds without soldering. Multiple modules are available, each with different frequency centers that cater to different sounds. Each one is built in the Pacific Northwest using only the highest quality components available: 0.5% thin film resistors, 1% NP0 capacitors, and high performance audiophile-grade active components. Anima has a level of clarity and dynamic response that exceeds any other onboard circuit.
Anima was the result of 3 years of development. Prototypes were relentlessly tested in a variety of instruments, and David Segal of New York Bass Works lent his ear during the prototyping process to make sure the final product was something worthy of a high performance instrument. As a result, the Anima preamp is standard equipment in New York Bass Works instruments.
Product Specs
This kits includes everything you need to install the Anima preamp in your bass:
1 x Anima Module
1 x Wiring Harness
1 x Switchcraft Stereo Jack
2 x DPDT Toggle Switches
3 x Noble 50k Potentiometers (you can add a stacked pot if you wish)
2 x 9v Battery Snaps
The Anima BLUE module is a high-performance bass preamp that is designed to have a less hi-fi and more rock-oriented tone than the RED module. The bass control is dynamic – the center frequency increases as boost/cut is increased, up to 70 Hz at maximum boost/cut. It has a more subtle roll-on than the bass control on the RED module. The treble control is voiced lower at 4 kHz which is perfect for accentuating pick attack and providing upper end presence even through tweeterless speaker cabinets. The switchable 400/1000 Hz midrange control is perfectly dialed in for shaping the body and attack of your instrument.
Bass +/- 17 dB @ 70 Hz (dynamic)
Mid +/- 13 dB @ 400/1000 Hz
Treble +/- 15 dB @ 4 kHz
Size 39 x 32 x 17 mm
Battery Life 500 Hours @ 18v
Input Impedance 1M Ohms
Output Impedance 100 Ohms