EdenBass Amplification:: Bass Heads; World Series, WTX260, WT405, WT505, WT800 :: Basses, Amps, FX :: Bassdirect
EdenBass Amplification:: Bass Heads; World Series, WTX260, WT405, WT505, WT800 :: Basses, Amps, FX :: Bassdirect
EDEN BASS AMPLIFICATION 2008
| >EDEN AMPS | EDEN CABS | EDEN COMBOS | NEMESIS AMPS/CABS | NEMESIS COMBOS | NEMESIS N SERIES |

All World Tour amplifiers are heavily overbuilt using military-style modular construction throughout, resulting in very high reliability and easy field service if ever required. From the one-piece .090 solid anodised aluminium chassis to the 18-guage steel cover, these units are built to take it and then some. The electronic components are the finest available and are carefully over-designed with generous safety margins to give you great reliability and survivability.
The best feature, however, is that warm, solid Eden tone that comes with every unit. Eden amps are designed to let the sound of your fingers and bass come through, just as you intended, but with a touch of warmth to slightly enhance your sound. No matter the style you play - from Metal to Jazz and everything in between - these amps are simple to use and easy to work with so that you can concentrate on the music, not knobs.
The WTX-260 is the perfect amplifier for players who need a full-featured amp that will fit in the pocket of the average gig bag. “We designed the WTX-260 for the travelling musician, especially those who travel internationally” said David Nordschow, Eden’s founder and Chief Engineer. “You can slip this amp into the pocket of most gig bags, and you can use it anywhere in the world with no modifications. Just attach the appropriate power cord and play away. The amplifier automatically senses and adjusts itself to local voltage.”
The pre-amplifier section of the WTX-260 is based on the Golden Ear chip for amazing warmth and musicality. This is the same chip used in ultra-high-end recording consoles and is more expensive – and more musical – than the chips used by other manufacturers. Powered by a unique Analogue Switching Amplifier that delivers 260W to 300W RMS (>500W peak, @ 4Ω w/ +3dB headroom), depending on local voltage conditions, the WTX-260 has an impressive list of features, including:
•Eden’s proprietary Enhance control
•3-band EQ with Dynamic Bass Boost and Mid-shift functions
•Switchable automatic compression
•Studio-quality DI with level, ground lift and Pre/Post-EQ select
•-12dB Input Pad
•FX loop
•Stereo Aux Inputs
•Tuner and Headphone outputs
•Two 1/4" and one NL-4 (Speakon) Speaker outputs
•Optional Footswitch for Mute and Enhance Bypass functions
•Optional Rack-mount hardware
•Made in USA
All the tone & features you've come to expect from Eden in an ultra-compact (3.8 lbs.) package.
WTX260 SPECS
Power 4Ω
260-300W* RMS @4Ω
Damping Factor
4000
Distortion
.006%
Frequency Response
10Hz-20KHz ±2dB
Headroom
3dB
Dimensions
8"W X 2.5"H X 9"D
Weight
3.8 LBS

This is the newest generation of bass amplifiers. The Time Traveller features a warm, studio sound quality and very low noise levels. A redesigned sloped front panel allows easy access to the simplified control section with mid shift and bypass. A dbx style compressor with adjustable threshold is coupled to dual inputs and the renowned Eden enhance control. The Time Traveller has an entirely new feature, an optically coupled dynamic smart booster for bass and treble. This allows for the bass and highs to be solid and well defined from a whisper to a roar. It automatically compensates for playing level so that the sound quality is maintained. Additional features include multiple patch points, auxiliary inputs, variable distortion, pre/post DI section, mute to tune, and a built in practice mode.
WT405 SPECS
Power 8Ω/4Ω/2Ω
250/405/620W RMS
Power Mono Bridge
N/A
Distortion
<.05%
Frequency Response
10Hz - 15KHz ±2dB
Headroom
3dB
Dimensions
13"W x 3.5"H x 12"D
Weight
15 LBS

You’ll find the WT550 Traveller to be unsurpassed in the market for its compact size. The WT550 Traveller, is a hybrid tube design rated at 750 watts at 2Ω with a minimum of 3dB of headroom. Standard features include: low noise compact design, -12dB input pad, switchable automatic compression, five-way semi-parametric tone control, mono pre and stereo post tone control effects loops, stereo aux inputs, DI out with ground lift, headphone out, tuner out, and a thermostatically controlled fan.
WT550 SPECS
Power 8Ω/4Ω/2Ω
300/500/750W RMS
Power Mono Bridge
N/A
Distortion
<.05%
Frequency Response
10Hz - 15KHz ±2dB
Headroom
3dB
Dimensions
12"W x 3.5"H x 12"D
Weight
20 LBS

Since its introduction 12 years ago, the WT-800 World Tour has been the number one choice of our touring endorsers. Our new “C” version now boasts an improved cooling system and more power. Conservatively rated at 440 Watts (4Ω) per side with both channels driven, and 880W bridged into 8Ω and a whopping 1100 Watts bridged into 4Ω (with a minimum of 3dB of headroom), the WT800C is still the perfect choice for the touring professional. Standard features include: switchable automatic compression, mute, five-way semi-parametric tone control, electronic crossover, pre and post effect loops, stereo aux inputs, DI out with ground lift, level and pre-/post-EQ select, headphone out, tuner out, and a thermostatically controlled fan.
WT800C SPECS
Power 8Ω/4Ω/2Ω
2 X 440W RMS @ 4Ω
Power Mono Bridge
880W RMS @ 8Ω
Distortion
<.1%
Frequency Response
10Hz - 15KHz ±2dB
Headroom
3dB
Dimensions
17"w x 3.5"h x 12"d
Weight
26 LBS

All prices are current and are subject to change and include UK VAT at 17.5%. If you are purchasing from outside the EC (European Community) we can deduct the VAT from your items.